Look at the catalog

Professional cementitious adhesive with very high performance, deformable with no vertical slip, thickness of use from 3 to 15 mm

it is used for the laying of

  • Single and double fired, clinker, stoneware, glass mosaic, natural stone, large formats and thin slabs
  • Floors, walls and façades
  • Laying on heated screeds, plasterboard, cement waterproofing membranes and existing floors


SEYGRIP-S1 complies with the requirements of the UNI EN 12004 standard.

With SEYGRIP-S1 it is possible to lay up to a thickness of 15 mm and since it has no vertical slip (thixotropic) it is also used to lay vertically without the use of spacers. Due to its deformability, it is suitable for all situations where a high performance of the adhesive is required: superimposed laying even of large sizes, in rooms subject to heavy traffic, on the façade and on heated screeds. In these cases, we recommend skimming the back of the tile to further ensure the final performance of the adhesive and optimize heat transmission.


  • Strictly follow the indicated water dosage.
  • Do not add aggregates or binders (lime, cement, plaster, etc.) or additives (setting accelerators, thinners, etc.).
  • The open time of the adhesive under normal environmental conditions is about 30 minutes, but in the case of particularly absorbent screeds, beating sun, wind and high temperatures this could reduce down to just a few minutes.
  • Protect the installed coverings against washout or rain for at least 24 hours and against frost or beating sun for 5-7 days after laying.
  • Do not use on concrete subject to intense shrinkage or on walls or floors subject to intense movements or vibrations.
  • For a correct use of the product, consult in advance the UNI 11493 standard.
PackagePallet Kg
GreyBag kg 251500
WhiteBag kg 251500